Connexion
Guide sur Compression and Dynamics: Controlling Volume Range

Guide sur Compression and Dynamics: Controlling Volume Range

How audio compression works — threshold, ratio, attack, release — and practical settings for vocals, drums, bass, and full mixes.

Compression and Dynamics: Controlling Volume Range

Introduction

Compression reduces the dynamic range of audio — making loud parts quieter and quiet parts louder. It is the glue that holds a mix together, the tool that makes vocals sit in the pocket, and the secret behind punchy drums and controlled bass.

How Compression Works

A compressor monitors the input signal and reduces its volume when it exceeds a threshold:

Input → Threshold → Gain Reduction → Output
  • Input signal exceeds the threshold → compressor activates.
  • Gain reduction is applied based on the ratio.
  • Output signal has a smaller dynamic range.

Core Parameters

Threshold

The level at which compression begins.
- Low threshold (e.g., −30 dBFS) — compresses more of the signal.
- High threshold (e.g., −6 dBFS) — only the loudest peaks are compressed.
- Typical vocal setting: −18 to −12 dBFS.

Ratio

How much gain reduction is applied above the threshold.

Ratio Effect Use Case
2:1 Gentle, transparent Bus compression, mixing
4:1 Moderate, standard Vocals, bass, guitar
8:1 Heavy Drums, aggressive sounds
∞:1 (limiter) Brick wall — nothing passes above threshold Mastering, peak limiting

Attack

How quickly the compressor reacts after the signal exceeds the threshold.
- Fast attack (0.1–5 ms) — catches transients immediately, sounds smooth.
- Slow attack (10–30 ms) — lets transients through before compressing, preserves punch.
- Drum tip: slow attack preserves the “crack” of the snare.

Release

How quickly the compressor stops reducing gain after the signal falls below the threshold.
- Fast release (10–50 ms) — compressor resets quickly, can sound aggressive.
- Medium release (100–300 ms) — natural, musical.
- Synced release — time the release to the song’s tempo for pumping effects.

Makeup Gain

After compression reduces the overall volume, makeup gain restores it:
- The purpose of compression is dynamic range control, not volume reduction.
- Always A/B your compressed vs. uncompressed signal at the same perceived loudness.

Compression Techniques

Parallel Compression

Blend a heavily compressed signal with the dry (uncompressed) signal:
- Preserves transients from the dry signal.
- Adds density and sustain from the compressed signal.
- Secret weapon for punchy drums and full-sounding vocals.

Sidechain Compression

The compressor is triggered by a different audio source:
- Kick triggers bass compression — the bass ducks when the kick hits (classic EDM technique).
- Vocal triggers music compression — the instrumental ducks slightly when the vocalist sings.

Multi-Band Compression

Splits the signal into frequency bands and compresses each independently:
- Useful for mastering — control bass, mids, and highs separately.
- Caution: overuse causes lifelessness.

Multiband vs. Single-Band

Aspect Single-Band Multi-Band
Simplicity Easy to use Complex, many parameters
Musicality More natural Can sound artificial if misused
Use case Individual tracks Mastering, complex sources

Compression Cheat Sheet

Source Threshold Ratio Attack Release
Vocals −18 to −12 dBFS 3:1–4:1 5–15 ms 100–200 ms
Kick −20 to −10 dBFS 4:1–8:1 10–30 ms 50–150 ms
Snare −15 to −8 dBFS 4:1–6:1 5–15 ms 100–200 ms
Bass −20 to −10 dBFS 3:1–4:1 10–20 ms 150–300 ms
Mix bus −6 to −3 dBFS 1.5:1–2:1 10–30 ms Auto

Practical Tips

  • Use your ears, not your eyes — the gain reduction meter shows activity, but the sound is what matters.
  • Less is more — heavy compression kills dynamics. Start subtle.
  • A/B constantly — bypass the compressor to ensure you are improving, not just making it louder.
  • Watch for pumping — if the compressor is obvious, the settings are too aggressive.
  • Compress in context — solo the track to fine-tune, but always check in the full mix.

Conclusion

Compression is simultaneously the most powerful and most misunderstood tool in production. Learn to use it subtly, and your mixes will sound professional. Over-compress, and they will sound lifeless and flat.

Test Your Knowledge!

Take the quiz to reinforce what you've learned

Multiple choice
Matching games
Memory challenges
START QUIZ
© MUSICOGRAM 2024 Compression: Controlling Dynamics